Manufacturing capability, seen from inside the factory
Electrical safety equipment made in Shijiazhuang, Hebei since 1996 — our own workshops, our own lines and our own testing, so specification, cost and lead time are controlled on one site.
One company, one site, three decades of production
Founded as JINHONG INDUSTRY CO., LTD. in 1996 and renamed HEBEI YUJINHONG TECHNOLOGY CO., LTD. in 2016, we manufacture electrical safety equipment for utilities, EPC contractors and distributors in 60+ countries.
The main production building — 80,000 m² of manufacturing buildings standing inside a 1,200,000 m² industrial park in Shijiazhuang, Hebei.
Profile and pipe production site
Our second production site for pipe and profile work, next to the main manufacturing buildings.
Four corners of the same business: factory, workshop, warehouse and shipping.
Site zoning
Workshops, mould store, raw-material store, finished-goods store and dispatch — one fenced site, one logistics flow.
Seven production lines under one roof
Material is staged at the line, formed and assembled in-house, then finished and packed on site — one schedule from raw material to the loading bay.
Insulating operating rods
Insulating operating rods assembled and finished in our production workshop, on the same site as the FRP profiles.
FRP profile workshop
Glass-fibre reinforced plastic profiles are pultruded and stored on site, which keeps the ladder, scaffold and rod programmes on one schedule.
Semi-finished goods
Semi-finished parts staged between processes, tracked by production order.
Curing and conveyor line
Curing and finishing on the conveyor line — a process step we keep in-house rather than subcontracting.
Sheet handling at the line
At the feed and take-off station the continuous sheet is led over the rollers, and the operator steadies the edge by hand before the material moves on.
Heavy workshop bays with overhead crane coverage
The bays where heavy steel and FRP sections are handled before assembly — crane-served, with material staged along the lines.
Material staging at the line
Standardised steel and FRP profiles staged beside the line, with reflective end markings on every bundle.
Manual process stations
Manual assembly and finishing stations alongside the automated lines, where fittings and hardware are matched to the drawing.
Capacity that is planned, not promised
Repeat orders and customised orders run through the same lines, planned per order and measured against committed lead times.
Our capacity comes from what we own: 525 employees across 7 production lines, in 80,000 m² of manufacturing buildings inside a 1,200,000 m² industrial park. Standard programmes — insulating mats, gloves, insulating rods, ladders and grounding assemblies — run as repeat batches, while one-off assemblies are built to drawing on the same floor.
- 7 dedicated production lines
Dedicated lines for mat production, glove processing, FRP profiles, insulating rods and grounding assembly — not a general workshop that switches tooling per order.
- ERP-tracked production planning
Production orders are planned and tracked in our ERP, so part-finished work and committed lead times are visible to the sales team.
- Batch traceability through work in progress
Work in progress is held against the production order, so finished goods trace back to the material batch they were produced from.
Casting and machining in-house
Alloy components cast and machined on site for our operating-rod and grounding assemblies, so tolerances are held without an outside supplier in the chain.
Batch production in progress
A batch on the floor mid-order — identical units produced to one drawing and one specification.
Material and profile storage
Profile and material stock held under cover on site — the buffer that keeps repeat orders on schedule.
Stock, packing and dispatch on the same site
Raw material, work in progress and finished goods are held in the same complex, so orders are packed and loaded without a third-party warehouse in between.
The warehouse building
Finished goods and material stock held under cover on site, in the same complex as the lines and the loading bay.
Finished goods, batch-marked
Palletised finished goods marked by batch, ready to be picked against a shipping list.
The whole range, on display in one room
The showroom brings the range together in one room — insulating mats, gloves, insulating rods, ladders and grounding assemblies — so buyers can compare models, finishes, marking and packing side by side. Visitors work through the display against their own drawings before a trial order is placed, and the samples on show come straight from current production rather than from a catalog. It is the quickest place to settle a specification question, because the item can be handled and measured on the spot.
The showroom display hall
The display hall, where the range is set out shelf by shelf for visiting customers, distributors and EPC teams.
Checked at every stage, not only at the end
Each order is checked against the drawing and the standard that applies to it — at incoming material, in process, and before the goods are released for shipment.
Incoming material inspection
Raw materials and bought-in components are checked against the specification before they are released to the line.
In-process checks
Each production order is checked at the defined stages of the process, with results recorded against the order.
Factory acceptance testing
100% dielectric tested before shipment, with third-party testing (SGS / TUV) supported on request.
Standards and documentation
Production is run to the standards our products are specified against, and every shipment is traceable from the raw-material batch to the delivered goods. Third-party testing (SGS / TUV) is supported when a project requires an independent report.
Test reports and certificate copies are available on request during qualification or tender processes.
Four ways to place work with us
From a full OEM programme to a single customised order — the factory, the paperwork and the shipping are handled in-house.
OEM / ODM and private label
Production under your own specification and brand — for distributors, brands and EPC packages.
Customization
Sizes, thicknesses, voltage classes, materials and configurations built to your drawing or sample.
Packaging
Export packing to your requirement — carton, pallet or crate, with shipping marks and labels as specified.
Shipment
Delivery arranged to your port or nominated forwarder, with the export documents issued for each shipment.
How an order runs
Send us a drawing or a specification
Tell us the product, the quantity and the standard you need. Our engineers review the enquiry and reply with the technical recommendation, the price and the lead time.
- Factory-direct quotation — no trading margin between you and the line.
- Technical review by our own engineers, in English, within 24 hours.
- OEM / ODM, custom sizes and private-label packing from the first order.
Talk to us directly
- Phone
- +86-311-68035766
- WhatsApp / WeChat
- +86-13739727566
Working hours: Mon – Sat, 08:30 – 18:00 (GMT+8). Enquiries received outside these hours are answered the next working day.